Residential House Wardrobe design.

Residential house wardrobes can be constructed with cypress timber structure with MDF or block board infill or with only MDF as both infill and structure.
For MDF infill type, the MDF Board should be at least 1 inch thick to enable for structural support strenth.
These boards are then drilled together using special screws and the screw locations are then filled up using stickers that come at the same colour with the board to ensure a sleek finish. The stickers have glue on one side after peeling their cover.
Lipping.
Lipping is sold in rolls. Its preferable for it to be same colour as the board to ensure aesthetic appeal. This is stuck to the board using conta glue.
Sliding door.

The sliding door is hoisted above a railing . See picture of railing below

The Wardrobe door handles are the recessed type to prevent the door handles from protruding and getting stuck in between 2 sliding door panels.

The drawers have rails stuck onto the sides of the wardrobe.

The doors caneither be swing type or sliding door type. The swing type occupy more space so if the room is tight on space, the sliding type is better.